MACHINE STRUCTURE

Machine base manufactured from heavy duty fabricated steel to guarantee stability and accuracy for operating units.
Body Frame is laser cut for strength and accuracy.

PANEL FEEDING SYSTEM

  • Main control touch screen HMI (Human machine interface) user friendly
  • The guide ways for the track pads consist of one steel bar ground and hardened and one precision machined flat bar. This maintains accuracy of panel feeding.
  • Track Mechanism consists of a chain drive with sprockets at either end of the machine.
  • Main track is fitted with rubber track pads.
  • Top pressure consists of heavy-duty beam being raised and lowered by two steel columns. These are fitted with rubber wheels.
  • Top Beam fitted with manual rise and fall with digital read out
  • When the top pressure is adjusted it automatically raises the trimming stations.

GLUE POT, EDGE FEEDING & PRESSURE ZONE

The glue pot consists of a quick melting system and a heated application roller.

  • The glue pot consists of a quick melting system and a heated application roller.
  • Control via a digital thermostat.
  • Edge feeding for materials 0.4 to 3mm
  • Guillotine for edging up to 3mm.
  • Pressure roller system consisting of 3 rollers. First roller being driven, then rollers 2, 3, are free running with independent pressure adjustment.
  • Machine if fitted with an encoder

SNIPPING UNIT

  • Two independent high frequency motors are fitted to trim the front and rear edges.
  • Trimmers are positioned using a precision linear slide way system enabling accurate trimming of panel.
  • Simple manual adjustment for accurate trimming.
  • Supplied complete with saw blade.
  • Motor4 power 2 x 0.37 KW
  • 12000 RPM
  • Motor angle adjustable

FINE TRIMMING UNIT

  • Two independent high frequency motors are fitted to trim top and bottom of panel.
  • Manual tilt movement between 0 and 10° for angled trimming of edging.
  • Independent tracing wheels for accurate machining of edging.
  • Fully adjustable tracing wheels for accurate machining of edging.
  • Automatic thickness adjustment via link to main beam.
  • Supplied complete with straight
  • Motor power 2 x 0.75KW
  • RPM 18000

TECHNICAL SPECIFICATION

Panel Thickness:  10-55mm
Panel Width Min:  60mm
Panel Length Min:  175mm (pvc)
Edge Width:  8-50 mm
Edge Thickness:  0.3 mm
Feed Speed:  0 – 18 m/min
Frequency Converter:  200Hz
Installed Power:  7.25kw
Pneumatic Power:  0.6MPa
Net weight:  1000kg
Overall dimensions:  2700mm L x 760mm W x 1400mm H

UNITS STANDARD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Please CONTACT US if you would like to obtain a QUOTE or enquire further regarding this item.

All machines are sold subject to our standard terms and conditions which are available upon request